S3C6410 ARM11 Development Board with 4.3 inch TFT TP and Wifi

Product Information 

The Samsung S3C6410 Board based on the powerful Samsung S3C6410 ARM11 processor is a compact full-featured single board computer, it runs at up to 667MHz, integrates 128MB Mobile DDR SDRAM, 256MB NAND Flash and 2MB NOR Flash, as well as a wide range of peripherals like USB interface, Ethernet interface, four serial ports, TV OUT, camera interface. These comprehensive features make this device particular suitable for automotive, industrial control applications and medical systems. In addition, this board supports Windows Embedded CE 6.0, Linux2.6, Android and Ubuntu operating systems.  TFT LCD / Touch Screen interface, supporting 3.5", 4.3", 7" TFT LCD Panel

Temperature range of minus 20 degrees Celsius to 70 degrees Celsius, without fans or heat sinks

Information Support
- IDEA6410 Introduction

Feature Summary
- Supporting WinCE6.0, Linux2.6.24, Android and Ubuntu OS
- Processor: Samsung ARM S3C6410, ARM1176JZF-S, up to 667MH
- 128MB DDR SDRAM, 166M
- 256MB NAND Flash, 16b
- 2M Bytes NOR Fla
- TFT LCD and Touch Screen interface with 4.3”
- 50-Pin GPIO connector ,50-Pin data and address BUS connect
- S-Video display interface
- One TVOUT interface
- One VGA interfa
- One 10-pin A/D interfa
- Two 20-pin SPI interface, it can connect WIFI,DTV Modu
- One audio input interface (3.5mm audio jack)
- One 2-channel audio output interface (3.5mm audio jack)
- One 10/100M Ethernet interface (RJ45)
- One High-speed USB2.0 OTG port (Mini USB type interface)
- Four serial ports (Two are five-wire RS-232 DB9 interface, another two are three-wire TTL serial port led out from a 20-pin expansion connector
- SD/MMC interface (supports 3.3V and 1.8V logic voltage)
- Two camera interfaces (30-pin FPC connector, support CCD or CMOS camera
- One 20-pin JTAG interface, one 10-pin CPLD JTAG interface
- Eight buttons (Reset, Boot, User defined, On/Off)
- Power supply: +12V
- Temperature range : 0 °C to 70 °C
- Many modules are available for your choice- GPS, WIFI, Camera, USB HUB and Matrix Keyboard Module 
- Modular Design: carrier board-200mm x 140mm; CPU board- 81.2mm x 55.8mm

IDEA6410 Single Board Computer Contents:
- One ARM11 IDEA6410 SBC 
  (with 4.3inch TFL LCD & TSP+Wifi Module)
- One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets) 
- One Serial cable (IDC10-to-DB9) 
- One 12V@2A Power adapter 
- One USB cable 
- One Cross Ethernet cable 

Be the first to review this product!